To find your tablecloth size, measure the length and width of your table, then add the drop you want on each side. For everyday meals, start with a drop of about 15–20 cm. The size chart below covers square, rectangle, round and oval tables, so you can read your size straight off it.
The tablecloth size guide in one sum
Every tablecloth size comes from the same sum:
Tablecloth size = tabletop size + (drop × 2)
The drop is the length of cloth that falls below the table edge. You add it twice because the cloth hangs over both sides. Do the sum once for the length and once for the width.
For example, a 180 x 110 cm table with a 15 cm drop needs a cloth of about 210 x 140 cm. To work backwards from a cloth you already own, subtract twice the drop you want from each side of the cloth.
Measure the tabletop only, not the legs or the floor space, and measure with any extension leaves in place if you'll use them. Our step-by-step measuring guide walks through it with a tape.
How much drop do you want?
There's no single right drop. These are common starting points:
| Look | Drop on each side | Good for |
|---|---|---|
| Short | about 10–15 cm | Coffee tables, kids' tables, outdoor tables in a breeze |
| Relaxed | about 15–20 cm | Everyday meals and long lunches |
| Dressier | about 25–30 cm | Dinner parties and celebration tables |
| Floor length | the height of the table | Buffet and event tables, where nobody sits close |
A drop that reaches the laps of seated guests can feel fussy and gets pulled when chairs move, so for a table people sit at, most households stay at or under about 30 cm. A floor-length drop is easier to judge on a serving table; take a little off so the hem stays clear of the floor.
Tablecloth size chart for common tables
The chart below applies the sum to some common tabletop sizes. Sizes are rounded and approximate. Look for a cloth close to the size in the last column, and choose the closer drop if you land between two cloths.
| Table shape | Tabletop | Drop | Cloth to look for |
|---|---|---|---|
| Square | 90 x 90 cm | 15 cm | about 120 x 120 cm |
| Square | 100 x 100 cm | 20 cm | about 140 x 140 cm |
| Rectangle | 150 x 90 cm | 15 cm | about 180 x 120 cm |
| Rectangle | 180 x 90 cm | 20 cm | about 220 x 130 cm |
| Rectangle | 180 x 110 cm | 15 cm | about 210 x 140 cm |
| Rectangle | 240 x 100 cm | 20 cm | about 280 x 140 cm |
| Round | 120 cm across | 20 cm | about 160 cm across |
| Oval | 200 x 110 cm | 20 cm | about 240 x 150 cm |
| Coffee table | 120 x 60 cm | 10 cm | about 140 x 80 cm |
Cloths are sold by the centimetres on the label, not by a name like "standard" or "large", and sizes differ from maker to maker. Handmade cloths can also vary a little, so read the listed size on each product page.
Matching the size to the shape of your table
Square and rectangular tables
A square table takes a square cloth, and a rectangle takes a rectangle. If a rectangular cloth is only slightly longer than you need, the extra length hangs at the ends, which usually looks fine. If it's too narrow, the sides look short, so check the width first.
For compact square and café tables, our small tablecloths guide has more sizes. For tables longer than about 240 cm, or two tables pushed together, see large tablecloths for big tables.
Round tables
Measure straight across the middle, which is the diameter, then add twice the drop: a 110 cm round table with a 20 cm drop takes a cloth about 150 cm across. A round cloth falls evenly on every side. A square cloth on a round table leaves points hanging lower at four places, which some people like and others don't.
Oval tables
Measure the longest and the widest points, then add twice the drop to each. An oval cloth follows the curve. A rectangular cloth works too, but its corners hang lower than the sides, so allow a slightly shorter drop if you want the corners to stay clear of laps.
Coffee tables and other low tables
A low table needs a short drop, because the cloth should stay well off the floor and away from feet. About 10–15 cm on each side is plenty. A 120 x 60 cm top with a 10 cm drop takes about 140 x 80 cm, and a 90 cm square top with the same drop takes about 110 cm square. Measure the table's height too, so the hem doesn't reach the floor.
Sizing a Christmas tablecloth
The sum is the same at Christmas, but the table often isn't:
- Measure the table as you'll use it on the day. If you add a leaf or a second table for extra guests, measure the full length then.
- Allow for a busy table. A shorter, relaxed drop is easier to manage with platters being passed and children at the table.
- Eating outside? A shorter drop is less likely to lift in a breeze, and it stays clear of the grass or the deck.
- A plain cloth still says Christmas. A natural linen or cotton cloth, dressed with greenery, candles or a runner, suits a summer Christmas table.
If you're choosing between shapes for the big day, our guide to the round Christmas tablecloth or rectangle has a round size chart by table diameter. When you know your size, browse linen and cotton tablecloths for Christmas tables in our table linen collection. For ideas on dressing it, see Christmas table setting ideas.
Our linen tablecloth and the tables it suits
The Stone Washed Linen Tablecloth is listed at "Approx. 84 x 60 inches (213 x 152 cm) (per supplier)". The listing says: "For a 15–20 cm drop on each side, the 213 x 152 cm size suits a rectangular table of about 173–183 x 112–122 cm." It has "frayed edges", and it is "Handmade, so slight variations in size, colour and finish are normal." Measure your table before you order.
Our other tablecloths are in the table linen collection, and each listing gives its own size. For how linen behaves in the wash, ironing and the difference between linen and cotton, read our linen tablecloth guide. For help choosing a colour, see colourful tablecloths and how to choose a colour.
Prefer a lighter look?
A table runner can stand in for a full cloth on a timber table, or sit on top of one. Our table runner size guide explains how long a runner should be for your table.
Tablecloth size checklist
- Tabletop length and width (or diameter), measured with any leaves in
- Table height, if you want a long drop or a floor-length cloth
- Your drop for the occasion
- The sum done for both length and width
- A cloth shape that matches the table
- The listed size on the product page checked against your numbers
Frequently asked questions
What size tablecloth do I need?
Measure the tabletop, decide on your drop, and add twice the drop to the length and to the width. A 150 x 90 cm table with a 15 cm drop needs a cloth of about 180 x 120 cm.
How much drop should a tablecloth have?
For everyday meals, a relaxed drop of about 15–20 cm on each side is the usual starting point. Go shorter, about 10–15 cm, for low or busy tables and longer, about 25–30 cm, for a dressier look.
What size tablecloth fits a round table?
Add twice the drop to the diameter. A 140 cm round table with a 15 cm drop needs a round cloth about 170 cm across.
Can I use a rectangular tablecloth on an oval table?
Yes. Measure the longest and widest points and add twice the drop to each. The corners will hang a little lower than the sides, so a slightly shorter drop keeps them clear of laps.
Is there a standard tablecloth size?
Not really. Sizes vary between makers, so go by the centimetres on the label and check them against your table and drop.
Does the size of a linen tablecloth change after washing?
Follow the care details on the product page, and remember that handmade cloths can vary slightly in size. Our linen tablecloth guide covers washing and drying linen.